" "
  Loading... Please wait...

Control Units

Sort by:
  • Magic Control CM-10 Plant control
    Magic Control CM-10 Plant control
    The Magic Control CM-10 Plant control is built exclusively for electrostatic coating with organic powders. Any other use of the product will be considered as non-intended use. The manufacturer is not responsible for...
  • Magic Control CM-30 Plant control
    Magic Control CM-30 Plant control
    The Magic Control CM-30 is a constituent part of the system and is thus integrated into the safety system of the plant. If it is to be used in a manner outside the scope of the safety concept, then corresponding...
  • MagicControl 4.0
    MagicControl 4.0
    Automation and process control MagicControl 4.0 is the central control unit for the powder coating systems. The clear user interface enables full control for all automation aspects of the application process. This allows...
  • MultiStar Gun Control (CG10)
    MultiStar Gun Control (CG10)
    Control up to 12 guns with only one unit With the new gun control MultiStar up to 12 guns can be controlled simultaneously. The clear display screen makes it easy to find the optimal settings in every condition. The...
  • OptiControl CM-20
    OptiControl CM-20
    The OptiControl CM-20 is a master control unit. It is used exclusively for operating a powder coating system with the corresponding control units. Any other use of the product will be considered as non intended use. The...
  • OptiControl CM-21
    OptiControl CM-21
    The OptiControl CM21 is a master control unit. It is used exclusively for operating a powder coating system with the corresponding control units. Any other use of the product will be considered as non intended use...
  • OptiControl CM-22 Plant control
    OptiControl CM-22 Plant control
    The OptiControl CM22 plant control is parameterized, configured and tested at the Gema factory. This allows for faster initial start up, with fewer parameters requiring configuration on site. The application data...
  • OptiStar 4.0 Gun Control
    OptiStar 4.0 Gun Control
    Outstanding performance and process control OptiStar 4.0 gun control ensures an optimized application with an exceptional coating result. The new generation of OptiStar presents the proven DVC- and PCC-Technologies and the...
  • Optistar All-In-One
    Optistar All-In-One
    Fastest response behaviour for highest coating efficiency The OptiStar All-in-One is the first control unit in the powder coating industry to combine electrostatics and powder feed via injector in an very compact device...