" "
  Loading... Please wait...

Blasting Test Equipment

Sort by:
  • 122 Elcometer Testex┬« Replica Tape
    122 Elcometer Testex® Replica Tape
    Elcometer 122 Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile, which can then be measured using the Elcometer...
  • Defelsko Positector 200 Ultrasonic Gauge
    Defelsko Positector 200 Ultrasonic Gauge
    The PosiTector 200 non-destructively measures a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites, metals and more. Advanced models measure...
  • Elcometer 102 Needle Pressure Gauge
    Elcometer 102 Needle Pressure Gauge
    The Elcometer 102 Needle Pressure Gauge is designed to measure air pressure in blast and air hoses. Pressure drop is responsible for decreased production rates, increased abrasive consumption and reduced anchor profile in...
  • Elcometer 103 Blast Nozzle Gauge
    Elcometer 103 Blast Nozzle Gauge
    The Elcometer 103 Blast Nozzle Gauge measures the orifice size of an abrasive blasting nozzle. This gauge is used to determine the nozzle orifice wear which leads to low nozzle pressure and decreased efficiency in the...
  • Elcometer 123 Surface Profile Gauge
    Elcometer 123 Surface Profile Gauge
    This easy to use gauge measures the peak-to-valley height of a blast cleaned surface. The average of a series of measurements provides an indication of the surface roughness and allows the surfaces to be compared as...
  • Elcometer 124 Thickness Gauge
    Elcometer 124 Thickness Gauge
    The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex Replica Tape. Available in both Metric and Imperial versions. Quick and easy to use...
  • Elcometer 125 Surface Comparators
    Elcometer 125 Surface Comparators
    These extremely durable comparators allow the estimation of surface roughness of either grit and shot blasted surfaces. Using the Elcometer 125 surface comparators as a reference the blasted profile can be compared to the...
  • Elcometer 128 Pictorial Surface Standards
    Elcometer 128 Pictorial Surface Standards
    Pictorial Surface Standards are high quality photographs which are used for comparison purposes to assess the visual appearance of a steel surface. Elcometer’s range of Surface Standards covers most of those required...
  • Elcometer 134A Chloride Ion Test Kit for Abrasives
    Elcometer 134A Chloride Ion Test Kit for Abrasives
    Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely. Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer...
  • Elcometer 134S Chloride Ion Test Kit for Surfaces
    Elcometer 134S Chloride Ion Test Kit for Surfaces
    Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life of the coating has been reached. To ensure...
  • Elcometer 142 ISO 8502-3 Dust Tape Test Kit
    Elcometer 142 ISO 8502-3 Dust Tape Test Kit
    The Elcometer 142 Dust Tape Test kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating...
  • Elcometer 1538 DIN Scratching Tool
    Elcometer 1538 DIN Scratching Tool
    The Elcometer 1538 has interchangeable carbide cutters for the preparation of specimens to be used for corrosion testing. Supplied complete with a 0.5mm (0.02”) or 1mm (0.04”) cutter. A Renault-version of the...
  • Elcometer Blasting Inspection Kits
    Elcometer Blasting Inspection Kits
    The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles. An Elcometer 456 Gauge and probe...
  • PosiTector 6000 - Coating Thickness Gage
    PosiTector 6000 - Coating Thickness Gage
    The PosiTector 6000 is our flagship dry film thickness gage. It is a versatile, rugged tester which is able to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly. FEATURES: Ready to...
  • Positector PaintGage DFT Coating Thickness Gauge
    Positector PaintGage DFT Coating Thickness Gauge
    The PosiTest DFT Coating Thickness Gage measures coatings on metal substrates. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments. PosiTest DFT...
  • Positector PaintGage Ultrasonic Thickness Measurement Gauge
    Positector PaintGage Ultrasonic Thickness Measurement Gauge
    The PosiTector UTG measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access...