Manual Pretreatment Application System (PEM)

(No reviews yet) Write a Review

Product Overview

The SPRAYWAND™ Pretreatment Application System

Designed for all OEM's and job shops that have an ongoing need for metal cleaning and metal pretreatment. It produces the same high quality results of high-end multi-stage pretreatment systems, at a fraction of the cost. We guarantee you will lower your production expenses and improve product quality through better paint adhesion and corrosion protection. The P300 is the only system in the industry that can deliver your pretreatment chemicals as required injected down stream. It is also the only system that can apply chemicals at either heated or ambient temperature and at high pressure for maximum cleaning. The P300 also has the ability to apply the gels that have been developed for those next to impossible to clean surfaces.

Large Bulky & Complex Parts

The freedom of movement offered by the SprayWand™ enables an operator to easily and efficiently prepare large and complex parts and assemblies for final metal finishing.

Medium & Low-quantity Runs

Quick startup and direct application of chemicals, with minimal waste, makes the system a cost-effective way to professionally pretreat medium and small quantities of parts.

Consistent Results

The PEM system is engineered to meet the demands of high-production environments. The heavy-duty delivery system and precision-fixed ratio chemical injectors, ensure consistent output and consistent higher quality pretreatment results - part after part.

P-300 Spraywand Key Features

Chemical Control

Fixed orifice injectors deliver precise chemical metering for maximum performance and savings. Downstream injection provides better, faster cleaning. (Pump components are not exposed to chemical). All machine components exposed to chemicals are stainless steel.

Heat Transfer

Adjustable wash temperature. High-efficiency two-stage coil maximizes heat transfer. Burner is naturally aspirated for efficient combustion.

Safety First

3-Step redundant safety features. Easy-to-read diagnostic panel. Electronic ignition maximizes safety and simplifies use. ETL and CFA certified.

Versatile & Durable

Heavy-duty Baldor-NEMA motors, Cat Pump and Clutch System and Beta™ pump to extend life of coil. Versatile design offers easy setup and operation for wide variety of metal pretreatment needs.

Horsepower 7 1/2
Electrica 208 -1 Phase / 230 or 460 -3 Phase
Connection 4 Wire Through Junction Box
Pressure (PSI) 1500 Main Gun / 800 Seal Gun (Option)
Burner Outputl 545,000 BTU
Gas Connection 3/4" NPT
Fuel Consumption 5" -9" WC (NG) -or- 11" WC (LP)
Minimum Stack 12"
Dimensions 56"L x 28"W x 64"H, 1050# (Ship Wt.)
Nozzles 1 -15085 x 1/4" NPT





(No reviews yet) Write a Review