" "
  Loading... Please wait...

Test Equipment

Sort by:
  •  Elcometer 134 CSN Chloride, Sulphate & Nitrate Kit
    Elcometer 134 CSN Chloride, Sulphate & Nitrate Kit
    Elcometer 134 CSN Chloride, Sulphate & Nitrate KitDesigned to accurately, measure surface chloride, sulphate and nitrate ions in minutes, the Elcometer 134 CSN Salt kit offers a single kit solution for testing in the...
  •  Elcometer 138 Conductivity Meter
    Elcometer 138 Conductivity Meter
    Incorporating a flat sensor, the Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a single drop of a sample. Users can either place a sample on the conductivity meter’s flat sensor or...
  •  Elcometer 138/2 Surface Contamination Kit
    Elcometer 138/2 Surface Contamination Kit
     Elcometer 138/2 Surface Contamination Kit. The measuring the level of contaminants on a surface prior to application of the coating is essential to ensure the quality of the coating and that its optimum lifetime is...
  •  Elcometer 207 Precision Ultrasonic Gauges
    Elcometer 207 Precision Ultrasonic Gauges
    he Elcometer 207 series of Precision Ultrasonic Thickness Gauges is designed to provide accurate measurements on thin materials. All Elcometer 207 and 207DL ultrasonic gauges also have the special PLAS mode. This is...
  •  Elcometer 223 Digital Surface Profile Gauge
    Elcometer 223 Digital Surface Profile Gauge
    A Digital Surface Profile Gauge which measures the peak-to-valley height of a surface in a similar way to the Elcometer 224. RS232 output - for direct transfer of readings to a PC, datalogger, miniprinter etc. This...
  • 122 Elcometer Testex┬« Replica Tape
    122 Elcometer Testex® Replica Tape
    Elcometer 122 Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile, which can then be measured using the Elcometer...
  • 270 Elcometer Pinhole Detectors
    270 Elcometer Pinhole Detectors
    The Elcometer 270 range utilises the wet sponge technique and has been designed to set a new standard for wet sponge detectors - a high quality, low voltage detector with similar accessories to a high voltage spark tester...
  • 500V Meg Ohm Meter
    500V Meg Ohm Meter
    The 500V Meg Ohm is used to check proper earthing / grounding of parts.
  • Adhesion Testing Tape
    Adhesion Testing Tape
    Along with cross hatch tester / cutters the scotch 600 adhesion transparent tape is used to test the adhesion of film on the substrate.
  • CENTER 309 - Thermometer (K Type, 4 Inputs, Datalogger)
    CENTER 309 - Thermometer (K Type, 4 Inputs, Datalogger)
    K Type, 4 Inputs, Datalogger In some applications, the temperature is concerned at more than two points. This is why we provide the four channels model thermometer 304 and 309. The operation interface is intuitive and all...
  • Defelsko Positector 200 Ultrasonic Gauge
    Defelsko Positector 200 Ultrasonic Gauge
    The PosiTector 200 non-destructively measures a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites, metals and more. Advanced models measure...
  • Elcometer 102 Needle Pressure Gauge
    Elcometer 102 Needle Pressure Gauge
    The Elcometer 102 Needle Pressure Gauge is designed to measure air pressure in blast and air hoses. Pressure drop is responsible for decreased production rates, increased abrasive consumption and reduced anchor profile in...
  • Elcometer 103 Blast Nozzle Gauge
    Elcometer 103 Blast Nozzle Gauge
    The Elcometer 103 Blast Nozzle Gauge measures the orifice size of an abrasive blasting nozzle. This gauge is used to determine the nozzle orifice wear which leads to low nozzle pressure and decreased efficiency in the...
  • Basic Kit
    Elcometer 107 Cross Hatch Cutter
    The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate.Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough...
  • Elcometer 115 Wet Film Combs
    Elcometer 115 Wet Film Combs
    These reusable precision stainless steel wet film combs are made to be long lasting and are supplied with either Metric or Imperial film thickness measurements.Four separate wet film thickness ranges are available up to a...
  • Elcometer 116 Whirling & Sling Hygrometers
    Elcometer 116 Whirling & Sling Hygrometers
    The Elcometer hygrometers are designed to determine the dewpoint and relative humidity at any given time. The Elcometer 116A Whirling Hygrometer is available in Celsius scale. A guide for Relative Humidity (RH)...